FDA Launches Agricultural Water Assessment Builder to Help Farms Understand Agricultural Water Proposed Rule Requirements

From the U.S. Food and Drug Administration

The U.S. Food and Drug Administration (FDA) released a new user-friendly online Agricultural Water Assessment Builder to help farms understand the proposed requirements for an agricultural water assessment in the Agricultural Water Proposed Rule.  Use of the tool is optional.

If finalized, the proposed rule would require farms to conduct systems-based agricultural water assessments to determine and guide appropriate measures to minimize potential risks associated with pre-harvest agricultural water. The assessment would include an evaluation of the water system, agricultural water use practices, crop characteristics, environmental conditions, potential impacts on source water by activities conducted on adjacent and nearby land, and other relevant factors, such as the results of optional testing. Covered farms would be required to conduct pre-harvest agricultural water assessments annually, and whenever a significant change occurs that affects the likelihood that a known or reasonably foreseeable hazard will be introduced into or onto produce or food contact surfaces.

The Agricultural Water Assessment Builder prompts users to answer questions and/or fill in information specific to their farms. Information entered into the tool is not shared with the FDA and will not be saved. However, users have the opportunity save or print the information they provide to their local computers.

This user-friendly tool incorporates information from the Agricultural Water Proposed Rule, the Final Qualitative Assessment of Risk to Public Health from On-Farm Contamination of Produce, and the 2015 Produce Safety Final Rule.

The development of this tool is consistent with our objectives in the New Era of Smarter Food Safety Blueprint to look for smarter tools and approaches for food safety. We welcome feedback on this optional tool, such as suggestions related to the tool’s functionality and, usability. Feedback on the tool can be sent to agwaterbuilder@fda.hhs.gov.

For Additional Information

Save the Date – March 11 webinar offers discussion about proposed agricultural water requirements for Produce Safety Rule

Western States Webinar on Proposed Agricultural Water Rule

Save the date for a western states webinar 10-11 a.m. (PST) March 11 on a revision proposed by the U.S. Food and Drug Administration (FDA) to Subpart E of its Food Safety Modernization Act (FSMA) Produce Safety Rule that would change the pre-harvest agricultural water requirements for covered produce (other than sprouts).

The webinar is co-hosted by the National Association of State Departments of Agriculture (NASDA) and California Department of Food and Agriculture (CDFA) for the western states of Arizona, California, Colorado, Hawaii, Nevada, New Mexico and Utah.

FDA’s proposed revision, for which FDA developed an Agricultural Water Assessment Fact Sheet, is intended to address stakeholder concerns about the complexity and practical implementation of certain pre-harvest agricultural water requirements. The proposed revision does not change requirements for agricultural water used during and after harvest, or for sprouts. If enacted as proposed, the revision would introduce a systems-based, pre-harvest agricultural water assessment to evaluate potential hazards and guide risk management decision-making on the farm. Public comments about the FDA’s proposed revision may be submitted via the Federal Register until April 5, 2022.

During the webinar, CDFA Secretary Karen Ross will give opening remarks, then a subject matter expert from FDA will provide a brief overview of the proposed revision. Attendees will have the opportunity to ask FDA officials questions about the proposed revision. In California, the Produce Safety Rule is regulated on FDA’s behalf by the CDFA Produce Safety Program. Questions may be shared with presenters and hosts ahead of the webinar by submitting them to producesafety@cdfa.ca.gov. Visit https://www.surveymonkey.com/r/WesternProposedAgWater to receive login instructions for the March 11 webinar. Participation is limited to 500 people on a first-come, first-served basis.

Proposed revision to Produce Safety Rule agricultural water requirements — comment period open through April 5

The U.S. Food and Drug Administration (FDA) is proposing a revision of the Food Safety Modernization Act (FSMA) Produce Safety Rule that would change the pre-harvest agricultural water requirements for farms covered by the Produce Safety Rule (other than sprouts). Most California fruit, vegetable and nut farms are covered by the Produce Safety Rule, including those with more than $25,000 in average annual produce sales, with some exceptions.

FDA’s proposed revision is intended to address stakeholder concerns about the complexity and practical implementation of certain pre-harvest agricultural water requirements. The proposed revision does not change requirements for agricultural water used during and after harvest, or for sprouts. It would introduce a systems-based, pre-harvest agricultural water assessment to evaluate potential hazards and guide risk management decision-making on the farm. Public comments about the FDA’s proposed revision may be submitted via the Federal Register until April 5, 2022.

In California, the Produce Safety Rule is regulated on FDA’s behalf by the California Department of Food and Agriculture (CDFA) Produce Safety Program. During the proposed revision’s comment period and until the FDA rulemaking process has been completed, CDFA’s Produce Safety Program will maintain the current inspection process related to this section of the Produce Safety Rule.

Visit CDFA’s Produce Safety Program webpage for more information about farms covered by the Produce Safety Rule.